Epson PowerLite 713c Podręcznik Użytkownika Pobierz pdf (Strona 61)

Maintaining and Transporting the Projector

Follow these steps to replace the lamp:

1. Turn off the projector, then unplug the power cord.

2. Allow the projector to cool down for at least half an hour (if it has

been on).

3. Turn the projector upside-down to access the lamp compartment.

4. Use a screwdriver to loosen the retaining screw on the lamp cover.

(You can’t remove the screw from the cover.)

When the screw is loose, lift off the lamp cover.

)

5. Use a screwdriver to loosen the two screws holding the lamp in

place. (You can’t remove these screws.)

6. Lift up the wire handle, as shown, and pull the lamp straight out.

warning

Let the lamp cool before

replacing it. If the lamp

breaks, handle the shards

carefully to avoid injury.

caution

Do not touch the glass

ortion of the lamp assembly.

Touching the glass could

result in premature lamp

ailure.

handle

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 104 105

Brak uwag

Epson PowerLite 713c Podręcznik Użytkownika Strona 61