Epson Stylus Color 850 Ink Jet Printer Instrukcja Naprawy Pobierz pdf (Strona 7)

EPSON Stylus COLOR 850

3/98 EPSON Stylus COLOR 850

- 7

2. Open the ink cartridge packages that came with your

printer. Then remove only the yellow part of the tape seal

on the top of each one. Don’t pull off the white portion or

try to remove the clear seal underneath the cartridge.

Caution:

Install the ink cartridges that came with the printer to ensure the

print heads charge correctly.

You must remove the yellow tape from the top of the cartridge or

you will permanently damage it. It’s okay if a small corner of the

yellow tape stays on the cartridge.

Warning:

If ink gets on your hands, wash them thoroughly with soap and

water. If ink gets into your eyes, flush them immediately with

water.

3. Press the

P power button to turn on the printer. The

power light flashes and the

B and

A ink out lights come

on. The black ink cartridge holder moves into loading

position.

4. Open the printer cover and lift up the black ink cartridge

clamp.

5. Place the black ink cartridge in the holder with the arrow on

the top label facing the back of the printer. Then close the

clamp, making sure it clicks into place.

Caution:

If the ink cartridge holder moves back to the right before you install

the cartridge, don’t try moving it back by hand. Press the

Y black

cleaning button and hold it down for 3 seconds to move the holder

back into position.

6. Now press the

X color cleaning button to move the color

ink cartridge holder into loading position.

7. Repeat steps 4 and 5 to install the color ink cartridge. Then

press the

E load/eject button to begin charging the ink

delivery system.

Charging takes up to 4 minutes. The

P power light flashes

and the printer makes various sounds until it’s finished.

Don’t turn off the printer or interrupt the charging process

or it will start over, using more ink than necessary.

Caution:

Never turn off the printer when the

power light is flashing,

unless the printer hasn’t moved or made any noise for more than

10 minutes.

Removing and Installing an Ink

Cartridge

When the

B black or

A color ink out light flashes, the

indicated cartridge is low on ink. This is a good time to make

sure you have a new cartridge. When the light stays on, the

cartridge is empty and you need to replace it.

Use these EPSON ink cartridges within six months of

installing them and before the expiration date on the package:

Black ink cartridge:S020108

Color ink cartridge:S020089

black cartridge

color cartridge

Remove the yellow

tape seal, but

don’t remove the

white portion

black ink cartridge

holder

1 2 3 4 5 6 7 8 9 10 11 12

Komentarze do niniejszej Instrukcji

Brak uwag

Epson Stylus Color 850 Ink Jet Printer Instrukcja Naprawy Strona 7

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Drukuj i skanuj Epson Stylus Color 850 Ink Jet Printer