Epson Stylus Color 600 Ink Jet Printer Instrukcja Naprawy Pobierz pdf (Strona 4)

EPSON Stylus COLOR 600

4 - EPSON Stylus COLOR 600 1/97

Mechanical

Paper feed method Friction

Paper path Sheet feeder, rear entry

Sheet feeder

capacity 100 sheets at 17 lb (64 g/m

) paper

Total print volume 75,000 pages (A4, Text)

Dimensions

Storage Width: 16.9 inches (429 mm)

Depth: 10.8 inches (275 mm)

Height: 6.6 inches (168 mm)

Printing Width: 16.9 inches (429 mm)

Depth: 24.1 inches (613 mm)

27.4 inches (695 mm) when

printing transparencies

Height: 12.2 inches (309 mm)

7.7 inches (196 mm) when

printing transparencies

Weight 11.5 lb (5.2 kg) without the ink cartridges

Electrical

Note:

Check the label on the back of the printer for the voltage

of your printer.

Environmental

Temperature Operation: 50 to 95 °F (10 to 35 °C)

Storage:

–4 to 140 °F (–20 to 60 °C),

stored in shipping container

1 month at 104 °F (40 °C)

120 hours at 60 °C (140 °F)

Humidity Operation: 20 to 80% RH

Storage: 5 to 85% RH (stored in shipping

container, without condensation)

Safety Approvals

Safety standards UL 1950 with D3, CSA C22.2 No.950

with D3

EMC FCC part 15 subpart B class B,

CSA C108.8 class B

Interface

Your printer is equipped with an 8-bit parallel interface and a

serial interface.

Parallel interface

The built-in parallel interface has the following characteristics:

Forward channel

Data format 8-bit parallel, IEEE-1284 compatibility

mode

Synchronization

STROBE pulse

Handshake timing

BUSY and ACKNLG signals

Signal level TTL compatible

Connector 57-30360 Amphenol connector or

equivalent

Reverse channel

Transmission mode IEEE-1284 nibble mode

Adaptable

connector 57-30360 Amphenol connector or

equivalent

Synchronization Refer to the IEEE-1284 specification

Handshaking Refer to the IEEE-1284 specification

Signal level IEEE-1284 Level 1 device

Data transmission

timing Refer to the IEEE-1284 specification

Serial interface

The printer’s built-in serial interface is based on the RS-423

standard. This interface has the following characteristics:

Standard Based on RS-423

Synchronization Synchronous

Bit rate Approx. 900 Kbps

Handshaking X-ON/X-OFF DTR protocol

Word format Data bit: 8 bits

Parity bit: None

Start bit: 1 bit

Stop bit: 1 bit

Connector 8-pin mini-circular connector

Recommended

cable Apple System Peripheral-8 cable

(Part number M0197)

Specification 120V Model 220−240V Model

Input voltage range 103.5 to 132V 198 to 264V

Rated frequency range 50 to 60 Hz

Input frequency range 49.5 to 60.5 Hz

Rated current 0.4A 0.2A

Power consumption Approx. 15W (ISO/IEC 10561 Letter Pattern)

1 2 3 4 5 6 7 8 9 ... 17 18

Komentarze do niniejszej Instrukcji

Brak uwag

Epson Stylus Color 600 Ink Jet Printer Instrukcja Naprawy Strona 4

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Drukuj i skanuj Epson Stylus Color 600 Ink Jet Printer