Epson VS400 Podręcznik Użytkownika Pobierz pdf (Strona 63)

Setting the Projector ID

Setting the Remote Control ID

Matching Multiple-Projector Display Quality

Parent topic: Adjusting Projector Features

Setting the Projector ID

If you want to control multiple projectors from a remote control, give each projector a unique ID.

1. Press the Menu button, select the Extended menu, and press Enter.

2. Select Projector ID and press Enter.

3. Use the arrow buttons on the remote control to select the identification number you want to use for

the projector. Then press Enter.

Repeat these steps for all the other projectors you want to operate from one remote control.

Parent topic: Projector Identification System for Multiple Projector Control

Setting the Remote Control ID

The remote control's ID is set to zero by default so it can operate any compatible projector. If you want to

set the remote control to operate only a particular projector, you need to set the remote control's ID to

match the projector's ID.

1. Turn on the projector you want the remote control to operate with exclusively.

2. Make sure you know the projector's ID number as set in the Extended menu Projector ID setting.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 120 121

Brak uwag

Epson VS400 Podręcznik Użytkownika Strona 63