Epson TM-H5000II series Dokumentacja Strona 168

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 246
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 167
Confidential
SHEET
154
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
155
GS ( A p
L
p
H
n m
[Name] Execute test print
[Format] ASCII GS ( A pL pH n m
Hex 1D 28 41 pL pH n m
Decimal 29 40 65 pL pH n m
[Range] (p
L+(pH
×256))=2 (where p
L=2, pH=0)
0 n 4, 48 n 52
1 m 3, 49 m 51
[Description] Executes a test print with a specified test pattern on the specified paper.
p
L
and p
H
specifies the number of parameters such as n, m as (p
L
+ (p
H
× 256))
bytes.
n specifies the paper to be tested.
n Paper
0, 48 Basic sheet (paper roll)
1, 49
2, 50
Paper roll
3, 51
4, 52
Slip
m specifies a test pattern.
m Test pattern
1, 49 Hexadecimal dump
2, 50 Printer status print
3, 51 Rolling pattern print
[Details] This command is enabled only when processed at the beginning of a line in
standard mode.
This command has no effect in page mode.
When this command is received during macro definition, the printer ends macro
definition and begins performing this command.
After the test print is finished, the printer resets itself automatically. Therefore,
the already-defined data before this command is executed, such as an
user-defined characters, downloaded bit image, and macro, becomes
undefined, and the receive buffer and print buffer are cleared, and each setting
returns to the default value. The printer also re-reads the DIP switch settings.
At the end of the test print, the printer cuts the paper, or ejects the cut sheet
when cut sheet is selected.
When cut sheet is selected, this command is executed after the ejection of the
paper if the paper.
The printer goes BUSY while this command is executed.
Przeglądanie stron 167
1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 245 246

Komentarze do niniejszej Instrukcji

Brak uwag