Epson Stylus Pro 10600 Print Engine with Archival Ink Przewodnik Szybki Start

Przeglądaj online lub pobierz Przewodnik Szybki Start dla Drukuj i skanuj Epson Stylus Pro 10600 Print Engine with Archival Ink. Epson Stylus Pro 10600 Print Engine with Archival Ink Quick Reference Guide [en] [ja] [zh] Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 9
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
Loading Roll Paper
Loading Roll Paper
Before using the printer, make sure its set up as described
in Chapter 1 of the Printer Guide.
Setting Up the Paper and Spindle
1 Open the roll paper cover and lift out the spindle.
2 Slide the movable paper stop off the left end of the
spindle.
4 Slide the movable paper stop back onto the spindle
and insert it firmly into the end of the roll.
5 Insert the white end of the spindle (with the fixed
paper stop) into the right mounting bracket.
1
Continue
paper stop
6 Place the black end of the spindle into the left
mounting bracket.
3 Position the roll so the paper unwinds as
shown, then slide the roll onto the spindle so it
fits securely against the paper stop.
Handle the roll carefully and avoid
touching the printable side of the paper
with bare hands. Fingerprints may affect
print quality.
SP10600 QRG 9/16/02, 05:11 PM1
Przeglądanie stron 0
1 2 3 4 5 6 7 8 9

Podsumowanie treści

Strona 1 - Loading Roll Paper

Loading Roll PaperLoading Roll PaperBefore using the printer, make sure it’s set up as describedin Chapter 1 of the Printer Guide.Setting Up the Paper

Strona 2

Loading Roll Paper (Continued)Loading Roll Paper (Continued)23 Feed the paper into the paper slot and then pull itdown so it extends through the slot.

Strona 3

Loading and Using Cut Sheet PaperLoading and Using Cut Sheet PaperPrinting on PosterboardWhen you print on posterboard (more than 19 mil thick),you ne

Strona 4

Checking and Cleaning the Print HeadChecking and Cleaning the Print HeadTo avoid damaging the printer, don’t turn it offuntil the cleaning cycle is fi

Strona 5 - Aligning the Print Head

Aligning the Print HeadAligning the Print HeadIf banding appears on your prints, or vertical lines are notstraight, you may need to align the print he

Strona 6 - Continue

Checking Ink Levels and Replacing Ink CartridgesChecking Ink Levels and Replacing Ink CartridgesReplacing Ink CartridgesWhen one of the Ink Out lights

Strona 7 - Ink Out light

Replacing Ink Cartridges (Continued)Replacing Ink Cartridges (Continued)73 Carefully pull the empty cartridge straight out of theprinter.If ink gets o

Strona 8 - Control Panel Messages

Message Light Explanation ResponseINK LOW Ink Out light(s) flashing Ink cartridge(s) nearly Replace ink cartridge(s) indicatedempty (printing continue

Strona 9 - Where To Get Help

Control Panel Messages (Continued)Control Panel Messages (Continued)9Message Light Explanation ResponsePAPER JAM Paper Out light Paper has jammed in t

Komentarze do niniejszej Instrukcji

Brak uwag