Epson CX7800 Przewodnik Szybki Start Pobierz pdf (Strona 1)

Epson Stylus

CX7800

Start Here

1 Open the paper support and pull up its extensions.

2 Open the output tray and pull out its extension.

3 Flip the feeder guard forward.

4 Slide the edge guide left.

5 Load paper against the right edge guide and slide the left edge

guide over.

6 Flip the feeder guard back.

4 Insert the cartridges in the holder for each color.

5 Press the cartridges down until they click.

6 Close the ink cartridge cover and press it down until it clicks.

7 Close the scanner.

8 Press the Start button to charge ink. Charging takes about

2 minutes.

Caution: Don’t turn off the Epson Stylus CX7800 while the On light is

flashing or you’ll waste ink.

Remove all the tape.

If any of these parts are missing, contact Epson

as described on the back

of this sheet.

Unpack

Load Paper

Note: Don’t load paper before installing the ink cartridges.

1 Lift up the scanner.

2 Open the ink cartridge cover.

3 Shake the ink cartridges, then unpack them.

Install Ink Cartridges

4 ink cartridges

1 Lift up the scanner.

2 Remove the tape from the ink cartridge holder.

3 Close the scanner.

Unlock the Printer

1 Connect the power cable.

2 Press the On button.

Turn On the

Epson Stylus CX7800

Paper support

Output tray

Letter

Software CD-ROM

Film holder

(see the Basics Guide

for storage instructions)

Power cord

Photo Projects

Made Easy

Basics Guide

Epson Stylus CX7800

Letter

4 x 6-inch or 5 x 7-inch

CPD20264_Sapp_SH_E.qxd 7/13/05 9:12 AM Page 1

1 2 3 4 5 6 7 8

Podsumowanie treści

Strona 1 - Start Here

Epson Stylus®CX7800Start Here1 Open the paper support and pull up its extensions.2 Open the output tray and pull out its extension.3 Flip the feeder g

Strona 2

Epson Stylus®CX7800Start Here1 Open the paper support and pull up its extensions.2 Open the output tray and pull out its extension.3 Flip the feeder g

Strona 3

Epson Stylus®CX7800Start Here1 Open the paper support and pull up its extensions.2 Open the output tray and pull out its extension.3 Flip the feeder g

Strona 4

Epson Stylus®CX7800Start Here1 Open the paper support and pull up its extensions.2 Open the output tray and pull out its extension.3 Flip the feeder g

Strona 5 - Any Problems?

5 Connect the USB cable, then route the cable in the slot as shown. 6 Connect the USB cable to any open USB port on your computer. Note: If installati

Strona 6

5 Connect the USB cable, then route the cable in the slot as shown. 6 Connect the USB cable to any open USB port on your computer. Note: If installati

Strona 7

5 Connect the USB cable, then route the cable in the slot as shown. 6 Connect the USB cable to any open USB port on your computer. Note: If installati

Strona 8

5 Connect the USB cable, then route the cable in the slot as shown. 6 Connect the USB cable to any open USB port on your computer. Note: If installati