Epson C823461 (Ethernet) Podręcznik Użytkownika Pobierz pdf (Strona 18)

Connecting the network cable

Once the board is installed in your printer, you must attach the

network cable to the interface. The Ethernet Card can accept

either a 10BASE-T or 10BASE network cable.

The Ethernet Card is an intelligent interface that can detect

which kind of cable is attached; you do not need to make any

hardware or software settings to specify the cable type.

However, you must not attach more than one cable at a time.

Attach the network cable to the appropriate connector on the

interface, as shown in the diagram.

Twisted-Pair (10BASE-T) Thin Coaxial (10BASE2)

Setting up the printer

Some EPSON printers require you to use the printer’s control

panel or DIP switches to select the interface you plan to use.

The method of making control panel settings on EPSON

printers may be called

SelecType

default-setting mode. See

your printer manual for instructions on making the necessary

interface settings.

Installing the Ethernet Card

Z-3

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 80 81

Brak uwag

Epson C823461 (Ethernet) Podręcznik Użytkownika Strona 18