Epson V11H295020 - PowerLite 85 XGA LCD Projector Podręcznik Użytkownika Pobierz pdf (Strona 134)

134 Projector Installation

If you’re mounting the projector on the ceiling and you place it above

screen level, you’ll have to tilt the projector down to position the

image on the screen. This causes the image to lose its square shape.

You can correct the distortion using the

Keystone function in the

projector’s menu system (see page 93).

If you place the projector so that the base of the lens is level with the

bottom of the screen, the image should be square and you won’t have

to adjust it. If you place the lens lower than the bottom of the screen,

you’ll have to tilt the projector upward if you want to fill the whole

screen with the image.

The following illustrations provide measurements you can use when

installing the projector:

Distance from

center of lens to

suspension

bracket

mounting point

3.7 in.

(95 mm)

0.5 in.

(13 mm)

12.8 in. (327 mm)

3.3 in.

(85 mm)

2.2 in.

57 mm

3.9 in.

(98 mm)

3.6 in.

(92 mm)

5 in. (127 mm)

9.5 in. (242 mm)

2.8 in.

(71 mm)

9.8 in.

(250 mm)

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 174 175

Brak uwag

Epson V11H295020 - PowerLite 85 XGA LCD Projector Podręcznik Użytkownika Strona 134