Epson 84 Podręcznik Użytkownika Strona 134

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 199
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 133
134 Solving Problems
Flashing red There is a problem with the fan or temperature sensor. Stop using the
projector, disconnect the power cable, and contact Epson as described
on page 149.
Flashing
orange
Rapid cooling is in progress. Although this is not an abnormal condition,
projection will stop automatically if the temperature rises higher. Make
sure there is plenty of space around the projector for ventilation, and that
the air filter and vents are clear. If you’re using the projector above 4900
feet (1500 m), turn on High Altitude Mode; see page 117.
Red The projector is overheating, which turns the lamp off automatically.
Wait until the cooling fan stops, then unplug the power cord. Plug the
power cord back in and press the Ppower button. Make sure the room
temperature is not above 95 °F (35 °C), and there is plenty of space
around the projector for ventilation. If you’re using the projector above
4900 feet (1500 m), turn on High Altitude Mode; see page 117.
The air filter or vent may be clogged. Clean them or replace the air filter
as described on page 121.
If the projector continues to overheat after you clean or replace the air
filter, contact Epson for help as described on page 149.
Warning: Except as specifically explained in this User’s Guide, do not
attempt to service this product yourself.
Flashing
orange
It’s time to replace the lamp. See page 122 for instructions. If you
continue to use the lamp after the replacement warning, there is an
increased possibility that the lamp may break.
Flashing red The lamp may be burnt out. First make sure the lamp cover is securely
installed. If that’s not the problem, let the lamp cool, remove the lamp,
and check if it is cracked. If it is cracked, replace it as described on
page 122. If it not cracked, reinstall the lamp and try using it again.
The air filter or vent may be clogged. Clean them or replace the air filter
as described on page 121.
If these steps do not resolve the problem, contact Epson as described on
page 149.
Status lights (continued)
Light Status Description
Przeglądanie stron 133
1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 198 199

Komentarze do niniejszej Instrukcji

Brak uwag