Epson 1810p - PowerLite XGA LCD Projector Podręcznik Użytkownika Pobierz pdf (Strona 67)

Maintaining the Projector 67

Follow these steps to replace the lamp and air filter:

1. Turn off the projector and unplug the power cord.

2. Let the projector cool for at least an hour (if it has been on). The

lamp is extremely hot immediately after use.

3. Loosen the lamp cover screw (you don’t need to remove it). Then

slide the lamp cover to the side and lift it off of the projector.

4. Loosen the two screws holding the lamp in place (you can’t

remove them).

warning

Let the lamp cool fully

before replacing it.

In the unlikely event that

the lamp has broken, small

glass fragments may be

present and should be

removed carefully to avoid

injury.

If the lamp is used after the

replacement period has

passed, the possibility that

the lamp may break

increases. When a lamp

replacement message

appears, replace the lamp

with a new one as soon as

possible, even if it is still

working.

Loosen, but don’t

remove these screws

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 103 104

Brak uwag

Epson 1810p - PowerLite XGA LCD Projector Podręcznik Użytkownika Strona 67